Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
CT Sounds designed the Tropo 5x7” shallow-mount coaxial speakers to compliment aftermarket subwoofer setups without stealing electrical (power) from your subwoofers and needing a 4-channel amplifier for these speakers to perform. These 5x7” speakers are engineered to be loud and clear on head-unit power while still offering solid mid-bass and not distorting at higher volume levels.
|RMS Power:||60 Watts (Pair)|
|MAX Power:||120 Watts (Pair)|
Many vehicle manufacturers (Ford, Chevy, Toyota, etc.) have very shallow speaker slots which makes it challenging to install aftermarket speakers without the window glass hitting the speaker magnet when rolling it down. To prevent this issue, you need to add spacers to lift the speaker, however, this creates a new problem where the speaker starts to contact the door panel due to cone excursion. The CT Sounds Tropo 5x7” has a 1.57” mounting depth (unheard of!) and is the only 5x7” speaker in car audio that offers a solution at the 60-watt rms power level.
Do your stock speakers sound distorted at higher volumes? Are you craving speakers that get loud and sound clean and can keep up with your subwoofer setup? Are you looking for an inexpensive way to get your speakers on the same level as your subwoofers? If yes, these are the perfect speakers for you!
|Speaker Type:||2-Way Coaxial Speaker Set|
|Impedance Per Speaker:||Single 4-Ohm|
|Power Per Speaker:||30W (RMS) | 60W (MAX)|
|Total System Power:||60W (RMS) | 120W (MAX)|
|Voice Coil Size:||1.00"|
|Voice Coil Wire Material:||EISV|
|Voice Coil Bobbin Material:||Kapton|
|Magnet Diameter:||65 mm|
|Magnet Height:||10 mm|
|Magnet Weight:||4 Oz|
|Cone Material:||Black Vacuum Polypropylene|
|Surround Material:||70° Nitrile Butadiene Rubber|
|Basket Type:||0.7 mm SPCC Steel|
|Terminal Type:||Steel Plate (Big Plate = Positive)|
|Output SPL (@1w/1m):||86 dB|
|Frequency Response (@SPL -10dB):||30 Hz - 20 kHz|
|Resonant Frequency:||85 Hz|
|Sweep Voltage:||8.76 V|
|Crossover Point:||3.0 kHz|
|Tweeter Size:||13 mm|
|Tweeter Type:||Black Silk Diaphragm|
|Tweeter Voice Coil Material:||EISV|
|Output SPL (@1w/1m):||89 dB|
|Frequency Response (@SPL -10dB):||1500 Hz ~ 20 kHz|
|Sweep Voltage:||2.8 V|
|Crossover Circuit:||3.3 μF Electrolytic Capacitor / 100 V|
|Filter For Tweeter:||6 dB/Oct|
|Overall Diameter:||8.66" x 5.47"|
|Cut-out Diameter:||7.14" x 4.93"|
Subscribe to get special offers, free giveaways, and once-in-a-lifetime deals.