CT-400.1D // 400 Watts RMS Monoblock Car Amplifier
CT-400.1D // 400 Watts RMS Monoblock Car Amplifier
CT-400.1D // 400 Watts RMS Monoblock Car Amplifier
CT-400.1D // 400 Watts RMS Monoblock Car Amplifier
CT-400.1D // 400 Watts RMS Monoblock Car Amplifier
CT-400.1D // 400 Watts RMS Monoblock Car Amplifier

CT-400.1D // 400 Watts RMS Monoblock Car Amplifier

Regular price 40% OFF Before: $199.99 Sale pricePrice: $119.99
/
$119.99
Details

CT Sounds engineered the CT-400.1D Compact Class D Monoblock Car Amplifier for anyone in need of a powerhouse amplifier that fits just about anywhere in your vehicle and won’t destroy your wallet. If you want a 400-watt amplifier that absolutely pounds and delivers clean power to your subwoofers then look no further. 

This 1-ohm stable monoblock amplifier features a Low Pass Filter (LPF), Subsonic Filter, and Bass Boost so you can get the exact sound you are looking for out of your amplifier. The MOSFET power supply and proprietary heat dissipation design will ensure that the amplifier runs cool for even the most demanding playlists. Furthermore, the compact chassis and small footprint makes it easy to install in any car audio application. 

You can sleep easy at night knowing your subwoofer amplifier is protected from damage due to the amplifier's uniquely engineered protection circuitry featuring high voltage, low voltage, over current, and high-temperature protection.

Quick Facts:
RMS Power: 1Ω @ 14.4v 400 Watts x 1-Channel
RMS Power: 2Ω @ 14.4v 300 Watts x 1-Channel
RMS Power: 4Ω @ 14.4v 150 Watts x 1-Channel
Power & Ground Input Size: 4 Gauge
Speaker Input Size: 12 Gauge
Features
Features:
Remote Bass Knob: ✔️
Continuously-Variable Input Gain Control ✔️
Remote Turn-On / Turn-Off Circuit ✔️
MOSFET Pulse Width Modulated Power Supply ✔️
Soft Turn-On Circuit ✔️
High Voltage / Low Voltage Protection Circuit ✔️
Thermal and Speaker Short Protection Circuit ✔️
LED Power and Protection Indicators ✔️
Specs
Technical Specifications:
Amplifier Type: Monoblock Amplifier
Amplifier Circuitry: Class D
Strappable? Yes; Signal Output is Master
RMS Power @ 1 Ohm: 400 Watts x 1-Channel (14.4v)
RMS Power @ 2 Ohm: 300 Watts x 1-Channel (14.4v)
RMS Power @ 4 Ohm: 150 Watts x 1-Channel (14.4v)
Recommended Fuse: 50A
Power & Ground Input Size: 4 Gauge
Speaker Input Size: 8 Gauge
Gain Adjustment: 0.15v - 10v
Low Pass Filter (LPF): 40 Hz - 180 Hz
Subsonic Filter: 0 Hz - 50 Hz
Bass Boost: 0 dB - 12 dB
Bass Boost Frequency: 30 Hz - 80 Hz
Frequency Response: 20 Hz - 320 Hz
Signal-To-Noise Ratio (S/N): 93 dB
Damping Factor: 170
Input Impedance: 22 Kohms
Input Sensitivity: 150 mV
Operating Voltage: 8.8v - 15.4v
Minimum Impedance: 1 ohm
Dimensions:
Length: 8.38"
Width: 5.63"
Height: 2.19"
Amp dyno video

Customer Reviews

Based on 66 reviews
95%
(63)
3%
(2)
0%
(0)
0%
(0)
2%
(1)
M
Mitch (Louisville, KY)
CT-400.1d

Great service. Amp is great. Shipped extremely fast.

D
Dave G. (Ansonia, CT)

CT-400.1D // 400 Watts RMS Monoblock Car Amplifier

J
Jaycob R. (Houston, TX)
Amazing customer service!!!!

I was originally buying this amp for 2 bio 10inch
But not until it got delivered did I realize I purchased the wrong one and the return process was smooth.

J
Justin W. (Oxford, MI)
Badass, running on one ohms with 15 1/2 volts

This thing was only supposed to do 400 watts RMS @ 1 ohm. When your alternator output is 15 1/2 on a GM truck, your potentially getting a little more than 400 watts RMS. I ran four parallel 8ga leads from the amp to a dual 2 ohm voice coil subwoofer, also a 2 farad capacitor with voltmeters and 15 and a half volts on power source. I have my gang turned down 1/3, sub control turned down halfway. Im still breaking the sub, a CT sound 400 w RMS 12. This amp can draw allot of power more than listed with higher voltage. Great for one sub setup if running on one ohm or two. Do not suggest running this amp on 4 ohms, significantly low power and sound

J
James O.l. (La Porte, IN)
Best bang for the buck

Exceeded expectations. High quality amp. Love the small compact size. Highly recommend.