Flash Sale

MESO-6-5-3WAY-COM // Meso 6.5 Inch 500 Watt 3-Way Component Speaker Set

Base Price: $249.99 Sale Price: $194.99

You Save 22% ($55.00)

$194.99
/

It’s no surprise the CT Sounds Meso components have been a best-selling product of CT Sounds for years. The Meso 6.5” 3-way component speakers are custom engineered to bring you the highest tonal accuracy by providing a well-balanced experience of rich tones from powerful mid-bass to snappy highs.

The 6.5-inch component woofer features a fiberglass cone and nitrile butadiene rubber surround which allows the 6.5 component speaker to deliver top notch sound quality and mid-bass to your vehicle. The 3.5-inch midrange speaker features a fiberglass cone, nitrile butadiene rubber surround, and a neodymium motor assembly which will have your music heard from several blocks away. To finish the equation, the 1-inch silk dome tweeters are suspended in ferrofluid with a N38H motor assembly to provide an accurate reproduction of your favorite tracks. These 25mm silk-dome tweeters are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp.

If you want to play your music loud enough for the entire neighborhood to hear, then look no further than the Meso 6.5” 3-Way Component Speaker Set.

Quick Facts:
RMS Power: 250 Watts (Pair)
MAX Power: 500 Watts (Pair)
Speaker Type: 6.5" 3-Way Component
Voice Coil Configuration: Single 4-Ohm
  • 6.5” 3-Way Car Component Speaker Set
  • Power per speaker set: 125W RMS | 250W MAX
  • Total system power: 250W RMS | 500W MAX
  • Voice Coil Configuration: Single 4-Ohm
  • 1.4” EISV Voice Coil
  • Fiberglass Cone
  • Nitrile Butadiene Rubber Surround
  • Aluminum Basket
  • 25mm Silk-Dome Tweeter
  • 3-Way Component Speaker Set Includes:
    • (2) 6.5” Midrange Woofers
    • (2) 3.5” Neo Midrange Woofers
    • (2) 25mm Silk-Dome Tweeters
    • (2) 18 dB Passive Crossover Networks
    • Screws and Mounting Brackets
    • Premium Wire For Easy Installation
    • Speaker Grilles for 6.5” and 3.5” Midrange Woofers
6.5" Woofer Specifications:
Voice Coil Size: 1.4"
Sweep Voltage: 11 V
Output SPL (@1w/1m): 89 dB
X-Over Point: 2.8 kHz
Resonant Frequency: 65 Hz
Frequency Response: 50 Hz - 4.5 kHz
Magnet Weight: 21 Oz
Magnet Type: Ferrite
3" Mid-range Woofer Specifications:
Power per Speaker: 30W (RMS) | 60W (MAX)
Total System Power: 60W (RMS) | 120W (MAX)
Output SPL (@1w/1m): 88 dB
X-Over Point: 2.5 kHz
Resonant Frequency: 65 Hz
Frequency Response: 300 Hz ~ 1500 Hz
Magnet Weight: 1.9 Oz
Magnet Type: Neo
Tweeter Specifications:
Sweep Voltage: 2.8 V
Output SPL (@1w/1m): 90 dB
Frequency Response: 1500 Hz ~ 20 kHz
Tweeter Size: 25mm
Tweeter Type: Silk-dome
Magnet Type: Neo
Crossover Specifications:
Crossover Circuit: 5.6 μF capacitor / 100 V
Filter for Woofer: 12 dB
Filter for Mid-range: 18 dB
Filter for Tweeter: 12 dB
6.5” Woofer Mounting Specifications:
Overall Diameter: 6.75"
Cutout Diameter: 5.70"
Magnet Diameter: 4.17"
Magnet Height: 1.22"
Mounting Depth: 2.87"
Overall Height: 3.10"
3” Mid-range Woofer Mounting Specifications:
Overall Diameter: 3.56"
Cutout Diameter: 2.87"
Magnet Diameter: 2.03"
Mounting Depth: 1.62"
Tweeter Mounting Specifications:
Overall Diameter: 2.12"
Cutout Diameter: 1.75"
Mounting Depth: 0.75"

Customer Reviews

Based on 78 reviews
95%
(74)
5%
(4)
0%
(0)
0%
(0)
0%
(0)
W
William Anson
2021 Dodge Challenger Install

I am completely blown away with the quality of these speakers have always used either infinity or JL components. Paired with an Audiocontrol D-4.800 and they are even better. Takes a bit to dial in just right but once you do just WOW. The Woofer fits in the door without any issues of window clearance. I have the tweeter installed right above the woofer since I like my highs not so harsh. 3" Midrange is mounted in the dash. I did have to make mounting brackets to fit them in the dash. Also made a little pocket in the dash kind of like a baffle and those things are even better than the free air of the dash. I have now ordered the coaxial for the rear deck and most likely will have to do them like the dash but will try without the baffle first. The only issue that I have with the Speaker set is that the crossover is a sealed unit and without modification to the housing you can not change the DB gain on the speakers. Other than that you should be good to go. Make sure you put dynamat or whatever sound treatment you choose in these doors and on the plastic of the doors they will cause everything to vibrate and cause odd noises. Hope this helps some of you dodge owners choose a great pair of components for your setup.

E
Eugene Alexander
Very loud!!!!

I have them coupled with a JL rd 4/400 amp......Sounds great!!

E
Everybodyknowme
Great speaker set

Very nice 3 way set, mid-bass is crazy for these 6.5. Glad I purchased.

R
Robert Edwards
Clear and loud

Sounds very good with crisp clear lyrics and punchy bass.

S
S.G.
Meso 3-way components for the win!

They do require some added mounting depth, but definitely worth the custom mounting install. They sound amazing , loud and clear. I am running two sets front and rear in my Hyundai Equus. I couldn't be happier!