MESO-6-5-COM // Meso 6.5 Inch 320 Watt 2-Way Component Speaker Set
You Save 22% ($37.40)$132.59
It’s no surprise the CT Sounds Meso components have been a best-selling product of CT Sounds for years. The Meso 6.5” 2-way component speakers are custom engineered to bring you the highest tonal accuracy by providing a well-balanced experience of rich tones from powerful mid-bass to snappy highs.
The 6.5 inch component woofer features a fiberglass cone and nitrile butadiene rubber surround which allows the 6.5 component speaker to deliver top notch sound quality and mid-bass to your vehicle. To finish the equation, the 1 inch silk dome tweeters are included to effectively deal with high frequencies. The voice coil is suspended in ferrofluid with a N38H motor assembly to provide an accurate reproduction of your favorite tracks.
If you want to play your music loud enough for the entire neighborhood to hear, then look no further than the Meso 6.5” 2-Way Component Speaker Set.
|RMS Power:||160 Watts (Pair)|
|MAX Power:||320 Watts (Pair)|
|Speaker Type:||6.5" 2-Way Component|
|Voice Coil Configuration:||Single 4-Ohm|
- 6.5” 2-Way Car Component Speaker Set
- Power per speaker set: 80W RMS | 160W MAX
- Total system power: 160W RMS | 320W MAX
- Voice Coil Configuration: Single 4-Ohm
- 1.4” EISV Voice Coil
- Fiberglass Cone
- Nitrile Butadiene Rubber Surround
- Aluminum Basket
- 25mm Silk-Dome Tweeter
- 2-Way Component Speaker Set Includes:
- (2) 6.5” Midrange Woofers
- (2) 25mm Silk-Dome Tweeters
- (2) 12 dB Passive Crossover Networks
- Screws and Mounting Brackets
- Premium Wire For Easy Installation
- Speaker Grilles for 6.5” Midrange Woofers
|Voice Coil Size:||1.4"|
|Sweep Voltage:||12 V|
|Output SPL (@1w/1m):||89 dB|
|Resonant Frequency:||65 Hz|
|Frequency Response:||40 Hz - 20 kHz|
|Magnet Weight:||21 Oz|
|Sweep Voltage:||2.8 V|
|Output SPL (@1w/1m):||90 dB|
|Frequency Response:||1500 Hz ~ 20 kHz|
|Crossover Circuit:||5.6 μF capacitor / 100 V|
|Filter for Woofer:||12 dB|
|Filter for Tweeter:||12 dB|
I have been running these 6.5 in meso speakers in my truck for around a year and I couldn't be happier. I have these speakers amplified with a small mono block amp class D. They are loud but still have that crisp sound. I have component set in the front and co-axle in the rear of my 00’ suburban. I was able to hit 120 db, but unfortunately that’s what my meter maxes out at. The only issue I had with these speakers was the fitment. The front were pretty much plug and play they mounted in just fine. The rear doors on my suburban have a metal support in the worst spot so I had to use a spacer. Overall these are some of the nicest sounding 6.5 I have owned.
Installed 2 pair in the doors & dash of my 16 Kia Forte & the fronts needed spaced out about 5mm to clear the windows, they are that deep. With that said the clarity & volume is incredible. The louder you turn it up the better they get. They compare pretty close to my years ago Sony Mobile ES set in my last build but much cheaper than they were. Love the adjustable tweeter too. Can't wait to add power & hopefully a better deck in the coming weeks. Thinking Meso 10's for lows.
I am really impressed with these component speakers. I run these with a Polk D5000.5 amp that runs 70w rms. These things sound clear and will thump pretty good for a 6.5. I would definitely recommend trying these if you have not yet.
I haven't installed these yet they appear to be decent fairly beefy mid, I've ran some meso pro audio 6.5s before and they did pretty good overall, hoping these do the same with some added mid bass, only complaint so far is the tweeters aren't the bushed aluminum or stainless like the 3 way set or the tweeters that are sold separately.