2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier
2000 watt monoblock amplifier

CT-2000.1D // 2000 Watts RMS Monoblock Car Audio Amplifier

17% OFF Before: $299.99 Price: $249.99
/
$249.99
Details

CT Sounds engineered the CT-2000.1D Compact Class D Monoblock Car Amplifier for anyone in need of a powerhouse amplifier that fits just about anywhere in your vehicle and won’t destroy your wallet. If you want a 2000 watt amplifier that absolutely pounds and delivers clean power to your subwoofers then look no further. 

This 1-ohm stable monoblock amplifier features a Low Pass Filter (LPF), Subsonic Filter, and Bass Boost so you can get the exact sound you are looking for out of your amplifier. The MOSFET power supply and proprietary heat dissipation design will ensure that the amplifier runs cool for even the most demanding playlists. Furthermore, the compact chassis and small footprint make it easy to install in any car audio application. 

You can sleep easy at night knowing your subwoofer amplifier is protected from damage due to the amplifier's uniquely engineered protection circuitry featuring high voltage, low voltage, over current, and high-temperature protection.

Quick Facts:
RMS Power: 1Ω @ 14.4v 2000 Watts x 1-Channel
RMS Power: 2Ω @ 14.4v 1200 Watts x 1-Channel
RMS Power: 4Ω @ 14.4v 650 Watts x 1-Channel
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge
Features
Features:
Remote Bass Knob: ✔️
Continuously-Variable Input Gain Control ✔️
Remote Turn-On / Turn-Off Circuit ✔️
MOSFET Pulse Width Modulated Power Supply ✔️
Soft Turn-On Circuit ✔️
High Voltage / Low Voltage Protection Circuit ✔️
Thermal and Speaker Short Protection Circuit ✔️
LED Power and Protection Indicators ✔️
Specs
Technical Specifications:
Amplifier Type: Monoblock Amplifier
Amplifier Circuitry: Class D
Strappable? Yes; Signal Output is Master
RMS Power @ 1 Ohm: 2000 Watts x 1-Channel (14.4v)
RMS Power @ 2 Ohm: 1200 Watts x 1-Channel (14.4v)
RMS Power @ 4 Ohm: 650 Watts x 1-Channel (14.4v)
Recommended Fuse: 200A
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge
Gain Adjustment: 0.15v - 10v
Low Pass Filter (LPF): 40 Hz - 180 Hz
Subsonic Filter: 0 Hz - 50 Hz
Bass Boost: 0 dB - 12 dB
Bass Boost Frequency: 30 Hz - 80 Hz
Frequency Response: 20 Hz - 320 Hz
Signal-To-Noise Ratio (S/N): 96 dB
Damping Factor: 190
Input Impedance: 22 Kohms
Input Sensitivity: 150 mV
Operating Voltage: 9.2v - 16v
Minimum Impedance: 1 ohm
Dimensions:
Length: 19"
Width: 5.63"
Height: 2.19"
Amp dyno video

Customer Reviews

Based on 255 reviews
94%
(239)
5%
(12)
1%
(2)
0%
(0)
1%
(2)
J
Jeff J. (Tacoma, WA)
My whole fleet is strictly CT SOUNDS now!

This is my second CT-2000.1D, it sounds so killer with the Strato 12’s in the vette. I had to duplicate it in the Silverado SS. I’m doing the hydro 10’s in the squarebody with a CT-1500.1D, and Meso everything else in front. My Z28 has the Tropo 12’s and CT-1000.D among other CT SOUND fronts.

D
Donald H.J. (Lanett, AL)

CT-2000.1D // 2000 Watts RMS Monoblock Car Audio Amplifier

A
ALBERT P. (Pompano Beach, FL)

Love the product it camed without damages wrapped very professional I just had the amp hooked up, the speakers are coming this week hopefully....You guys are doing a great job

J
Josiah F. (Dallas, TX)
It works good!!

I’m pretty happy with this amp! I had never installed a separate amp before (I’ve only ever done powered subwoofers) and I was a little nervous with the process. Everything was the same up until the speaker wires came along. To get the signal without running RCA cables from the head unit, you have to buy an LOC, which gives you the ability to tap speaker wires for the signal and transfer it to RCA cables. the one CT sounds makes did a great job! Both the amp and LOC are very sleek, they come with the screws to mount them, the instruction manuals are in depth, and they haven’t overheated, even though they are slightly squeezed behind a seat (there is air space for them to breathe though). I paired this with the meal 10in and wired the 10in down to 1ohms for peak performance. I’m definitely satisfied! Two things I would note: I don’t know if this is just the angle I have the amp mounted at, or if the ground and power wire are just too short or not stripped back enough, but the 0 gauge wanted to give me a hard time and slip out of the terminals while I was trying to align the amp to mount it. Could be user error, but I felt like pointing it out. The other thing is that the amp is hefty and is about 19in long, which is pretty long when trying to find a spot to mount outside of just the trunk. Make sure you measure the space you have for the amp prior. Either way, 5 stars!

User picture
H
Hugo R. (Tremonton, UT)
Really good product

I will buy more more products from this company. I am really impressed.

123