ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier
ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier
ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier
ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier
ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier
ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier

ATv2-3000.1d // 3500 Watt RMS Monoblock Car Audio Amplifier

Regular price 25% OFF Before: $799.99 Sale pricePrice: $599.99

The CT Sounds ATv2-3000.1d monoblock class d car amplifier will deliver the power you need to destroy the competition in the SPL lanes. Rated at 13.2v, this monoblock amplifier will deliver over 3500 watts rms power at 1 ohm. The car monoblock amplifier is strappable (slave/master switch) so that you can get more power output should your system require it.

Engineered to be the best in its class, the amplifier uses an advanced PCB board featuring industry-leading capacitors, MOSFET pulse width modulated power supply, high-quality transformers, and cutting-edge inductors. The amplifier comes equipped with a 4-way protection circuitry along with reverse polarity protection.

The plexiglass backing, illuminated LED CT Sounds logo, and white chassis give this amplifier an unbeatable appearance. Variable adjustment controls feature gains, subsonic, bass boost, low pass filter, and phase settings so you can get the exact sound you are looking for out of your amplifier. Included with the amplifier is the highly demanded AT Series On/Off Bass Knob which not only lets you adjust the bass boost but also displays your system voltage.

Quick Facts:
RMS Power: 1Ω @ 13.2v 3000 Watts x 1-Channel
RMS Power: 2Ω @ 13.2v 1600 Watts x 1-Channel
RMS Power: 4Ω @ 13.2v 800 Watts x 1-Channel
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge
AT Series Bass Knob Included: ✔️
Continuously-Variable Input Gain Control ✔️
Remote Turn-On / Turn-Off Circuit ✔️
MOSFET Pulse Width Modulated Power Supply ✔️
Soft Turn-On Circuit ✔️
High Voltage / Low Voltage Protection Circuit ✔️
Thermal and Speaker Short Protection Circuit ✔️
LED Power and Protection Indicators ✔️
Nickle Plated Tiffany Style RCAs ✔️
Bass Knob Features:
AT Series Bass Knob: 1. Remote Gain Control
2. Clip Light Indicator
3. Built-In Voltmeter
4. Pushable On/Off Switch
Technical Specifications:
Amplifier Type: Monoblock Amplifier
Amplifier Circuitry: Class D
Strappable? Yes; Master/Slave Switch
RMS Power @ 1 Ohm: 3000 Watts x 1-Channel (13.2v)
RMS Power @ 2 Ohm: 1600 Watts x 1-Channel (13.2v)
RMS Power @ 4 Ohm (Bridged): 800 Watts x 1-Channel (13.2v)
Recommended Fuse: 350A
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge
Gain Adjustment: 0.23v - 5.6v
Low Pass Filter (LPF): 35 Hz - 250 Hz
Subsonic Filter (HPF): 10 Hz - 50 Hz
Bass Boost: 0 dB - 18 dB
Bass Boost Frequency: 50 Hz
Phase Adjustment: 0° - 180°
Frequency Response: 10 Hz - 250 Hz
Signal-To-Noise Ratio (S/N): 91 dB
Damping Factor: 200
Input Impedance: 30 Kohms
Input Sensitivity: 230 mV
Operating Voltage: 9v - 16v
Minimum Impedance: 1 ohm
Length: 21.14"
Width: 7.59"
Height: 2.28"

Customer Reviews

Based on 14 reviews
Eric M. (Livonia, MI)
Customer Service/Equipment Quality

Had issues with my initial amp. 3500 watt mono AT 30001D .It banged when it worked. Went into a protect mode after a week. These guys replaced my amp with no issues. They were prompt, polite, and understanding throughout the entire process. New amp came in, it’ll beat the eyeballs out of your skull if you don’t keep your eyes shut.

Tristen D. (Tulsa, OK)
It gets down!

I have one pushing a single 12 and it’s definitely pushing the sub nice! Def would buy again!!

Jon P. (Biloxi, MS)
CT sounds at3000.1

This is my 2nd review on this amp. Ct sounds atv2 3000.1. BEAST.... It pushed my xfls a little too hard, so I upgraded to the HD 12d1s. Man. BASS 🥵. This amp does 4909 Uncertified at 1ohm. If you're on the fence about it, just do it...

Jon P. (Biloxi, MS)
CT sounds at3000.1

Just get it.... It's a beast. I have the at3000.1 pushing two American Bass xfl12s , and they slamming them almost out the custom box. Awesome sound quality. Efficiency is crazy good. I haven't dropped below 14.1 volts yet. Big 4. Mechman Alternator. Limitless Retro Pro30 battery. It's bas a$$.

K.W. (New Orleans, LA)
AT3000.1 series amplifier

I’ve owned every AT series amp except for the AT 7000 and loved every one I had never once had a failure with anything I’ve owned from CT Sounds the quality speaks for itself, this 3000.1 is no exception it has better Korean parts in it not built there but has some the hardware from what I’ve been told it must have cause it has performed flawlessly, it’s big beefy and solid Dyno I saw on Trevor moons page had it pushing over 3900 watts RMS at 1ohm not often you hear of an amp doing almost a 1000 watts over rated power! I have it pushing a Sundown X15”V3 Series sub in a spec built 13 ply Russian Baltic birch labyrinth ported enclosure by Drew Jones it pushes that sub like a boss the sun can take a more power but no need the 3000.1 Has my sub flexing like a trampoline, and sounds killer, ive run this amp on multiple 5 hour drives to florida from louisana and back and it hasn’t missed a beat or gotten hot it warms up never gotten hot amazed at how cool it runs for an amp that size with no fan on the board, it is a very powerful well built amp, clear backplate Tiffany style RCA’s gotta love that white color and the blue lights are still cool to see at night, and does almost 1000 watts over rated power is crazy cool, CTSounds FTW!