T-1000.1D // 1000 Watts RMS Monoblock Car Audio Amplifier
The CT Sounds T-1000.1D is a pure Class D car monoblock amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic. Equipped with a MOSFET Pulse Width power supply and Korean capacitors which provides the amplifier with the ability to store more capacity and cover the capacity difference in applications where the amplifier draws more current than is available from the electrical system. The inferior cooling design features a steel chassis, extra silicon, and more insulation between the heat seal and the PCB board.
The newest T-1000.1D model features a larger MOSFET than its prior edition. Furthermore, we have added more holes on the side panel for better heat dissipation. Lastly, the amplifier is equipped with built-in 4-way circuitry protection protecting against high voltage, low voltage, over current, and high-temperature; sleep easy at night knowing your amplifier is protected. Included with the amplifier is a remote control knob, allowing you to turn up or turn down the bass while driving.
- MOSFET PWM (Pulse Width Modulated) power supply
- Soft turn on circuitry
- 1 ohm stable mono operation
- Variable input gain control, subsonic filter & low pass crossover
- Thermal, DC offset, overload and speaker short protection inbuilt
- Nickel plated RCAs, thus low resistance inputs to the amp
- LED power and protection indicators
- It comes with remote knob, allowing you to control gains
- This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic
- 1Ω @ 14.4V, 1000W (RMS) | 2000W (MAX)
- 2Ω @ 14.4V, 700W (RMS) | 1400W (MAX)
- 4Ω @ 14.4V, 400W (RMS) | 800W (MAX)
- No of channel: 1
- Frequency response: 10Hz ~ 250Hz
- Gain adjustment: 0.2v ~ 5v
- Subsonic adjustment: 15Hz ~ 50Hz
- Bass boost: 0dB ~ +12dB
- Signal to noise ratio: 100dB
- Damping factor: 180
- Minimum impedance: 1Ω (ohm)
- Low Pass filter: 50Hz ~ 250Hz
- Bass level remote control (16.4ft): Yes
- Operating voltage (-ve ground): DC 12V
- Wire inputs: 4GA
- Bass knob: Remote gain control, power indicator
- 181mm (W) x 55mm (H) x 340mm (L)
super clean bass and very powerful I had to buy it again because most 1200 amp dont even compare to this 1000 watt amp only bad thing that my old ct sound amp only lasted 3 years but I'm giving it another shot by the quality bass it has
I received this amp and let me tell you that it is one of the cleanest deep bass that I’ve owned. I used to be a Rockford guy but these are the same if not better and at lower price. I believe they are under rated which is even better.
It’s sounds good now I jus need a box for my 12 in strato d2 that’s going to give me the sound I want
I was running my Alpine MRV-M500 on my 1st gen Type R 12, in a custom 1.5 cf enclosure tuned to 37hz. I was also running my Boston SL60s off my JL Audio JX400/4D Active. Last Saturday I installed my new T-1000D, and T-60.4.
I can tell you for sure, the CT sounds setup is far superior! I love My Alpine, and my JL, but these CT amps are surprisingly good! My sq has improved dramatically. The bass is louder, tighter, cleaner, much more punchy, less boomy. My mid bass is stronger, and my highs are cleaner, and louder!
Hopefully these amps hold up.