Meso 6.5 Inch Component Set
You Save 20% ($42.50)$169.99
The Meso 6.5” Full Range Car Audio Component Speakers Set is our flagship series. It includes everything - the woofers, tweeters, crossover boxes, grilles, and mounting hardware. You will experience quality midbass. Whether you are looking forward to SPL or SQ car audio systems, this Meso 6.5 comp set does is a perfect choice. Check out for more specs of this product below -
Whats in the box:
- 2 x Meso 6.5" Car Audio Midrange Driver (Woofer)
- 2 x 25mm Silk Dome Tweeters
- 2 x ABS Box Crossovers
- 2 x Woofer Protection Grilles
- 3 (Typed) x Tweeters mounting pods
- Each speaker has fiberglass cone with NBR (Nitrile Butadiene Rubber) surround
- Yellow color PC+NOMEX spider (white Zinc coated) with 6mm top plate and 5mm back plate
- Voice coil of 1.4" / 36mm (dia) at each speaker
- Y30 ferrite magnet at each speaker
- Each 25mm silk-dome tweeter is covered with silver chrome plated metal mesh face grille
- Crossover circuit box has dark clear top cover with CT Sounds logo printed on top
- Quality Copper Clad Aluminium Wire (CCAW) connected with tweeters for connectivity
- Spring type terminals for speaker connectivity, RED one for Positive (+ve) & BLACK one for Negative (-ve)
- Each speaker has black cast aluminium basket with black powder texture paint on them
- Embossed logo on speaker basket & around speaker magnet for a bold outlook
- Quality metal mesh face grilles (pair) for speakers safety
- Speaker size: 6.5"
- Speaker type: Component
- Impedance per speakers set (woofer+tweeter): 4-Ohm
- Power per speakers set: 75W (RMS) | 150W (MAX)
- Total system power: 150W (RMS) | 300W (MAX)
- Voice coil (dia): 1.4"
- Sweep voltage: 12 V
- Output SPL (@1w/1m): 89 dB
- Resonant frequency: 65 Hz
- Frequency response (@SPL -10dB): 50 Hz ~ 20 kHz
- Magnet size: 100mm x 20mm
- Magnet weight: 21 Oz
- Magnet type: Y30 ferrite
- Sweep voltage: 2.8 V
- Output SPL (@1w/1m): 92 dB
- Frequency response (@SPL -10dB): 800 Hz ~ 20 kHz
- Tweeter size (dia): 25 mm
- Tweeter type: Silk-dome covered with metal mesh face grille
- Magnet type: Neo
- Crossover circuit: 4 μF capacitor / 100V
- Crossover point: 3.5 kHz
- Filter for woofer: 6 dB
- Filter for tweeter: 12 dB
Mounting / Installation Parameters:
- Cutout diameter: 145mm / 5.8"
- Outer diameter: 176mm / 6.95"
- Mounting depth: 73mm / 2.9"
Just got these speakers hooked up and they sound amazing on my Rockford fosgate amp.
Best components u will ever buy tons of clear mid bass amazing quality i recomend them to everyone in fact u should buy to pairs
Am very much enjoying these compared to the coaxials they replaced (P1675). I still have the Punch RF components up front so I’m comparing. The Fosgates have the advantage being in the door but the Meso’s still sound good on the rear deck. Just make sure it’s deadened. Don’t like that the tweets can't come off the front bezel housing so putting them in the factory location may be a challenge (‘12 Accord). Have them crossed over at 80hz and hit all the lower notes my P1675-S don’t. I’m convinced the 3 way components Meso’s will complete the front stage. I just need to figure where I’m placing the 3in mids.
Pros: Great mid bass. Tweeters are not ear piercing.
Cons: Woofers won’t accept 14 gauge SHCA OFC. Terminals make it difficult to drop into deck when already screwed onto the speaker mount adapters and have to be wired from the rear of the push terminals due to lack of clearance. Tweeter front housing does not detach. With patience there are work arounds to these cons.
I have used MB quarts, Alpine, Boston and JBL to name a few and these meso 6.5” components blow them all always. Great value for what you get. Keep up the great work and look forward to adding more CT equipment to my set up.
Thank you for making great products at a price that doesn’t break the bank. Well done 👍👍